How to Switch From Ounces to Grams on Your 710-G Wheel Balancer (Step-by-Step)

1. Power on the machine

Turn on your 710-G wheel balancer.
When the starting screen appears, press the C + F buttons at the same time.

2. Enter CAL mode

After pressing C + F, the machine will enter CAL CAL calibration mode.

From this screen, press the A- (A down) button to move into the SEN (Sensor) function menu.

3. Select SEN 29

When “SEN” appears on the left display, rotate the shaft wheel until the right display shows “29.”
You should now see:

Left display: SEN

Right display: 29

4. Switch units (ounces ↔ grams)

Make sure the shaft wheel does NOT move during this step.

Press the following three buttons simultaneously:

FINE

F

A- (A down)

The screen will display:

OUNCE ON – ounces enabled

OUNCE OFF – grams enabled

Toggle to your desired unit.

5. Save and exit

Once the correct unit is selected, press C to save.
The machine will return to the startup screen, and your new unit setting will be active.

If you are still having difficulties with your wheel balancer, please contact our technical support team here: http://tinyurl.com/katoolform